Products

Available at Amazon

Function Generator

Function Generator

  • WF1973
    0.01 µHz to 30 MHz, 1-ch, Sequence function
  • WF1974
    0.01 µHz to 30 MHz, 2-ch, Sequence function
  • WF1947
    0.01 μHz to 30 MHz, 1-ch, Amplitude resolution:16 bit, Low noise and low distortion
  • WF1948
    0.01 µHz to 200 MHz, 1-ch, Max. output voltage: 20 Vp-p (110 MHz or less), Amplitude resolution:16 bit, Various functions
  • WF1967
    0.01 µHz to 200 MHz, 1-ch, Max. output voltage: 20 Vp-p (110 MHz or less), Amplitude resolution:16 bit, Various functions
  • WF1968
    0.01 µHz to 200 MHz, 1-ch, Max. output voltage: 20 Vp-p (110 MHz or less), Amplitude resolution:16 bit, Various functions
  • DF1906
    Basic model, 0.1mHz to 2MHz, Sine, triangle, square, arbitrary (ARB), DC, Arbitrary waveform editor (standard equipped), Oscillation modes: continuous, trigger, gate and burst

LCR Meter

LCR Meter

  • ZM2371
    Basic accuracy 0.08%, 1 mHz to 100 kHz, Measurement speed: max. 2ms, Interfaces: USB, RS-232
  • ZM2372
    Basic accuracy 0.08%, 1 mHz to 100 kHz, Measurement speed: max. 2ms, Contact check function, Interfaces: USB, RS-232, GPIB, handler
  • ZM2376
    Basic accuracy 0.08%, 1 mHz to 5.5 MHz, Measurement speed: max. 2ms, Contact check and low capacitance check function, Interfaces: USB, RS-232, GPIB, LAN (optional), handler

DC Bias Adapter

Test Fixture - Test Fixture

Test Fixture - Chip Component Test Leads

Test Fixture - Three-terminal Alligator-clip Test Leads

Test Fixture - Kelvin Clip Test Leads

Test Fixture - Chip Test Fixture

  • ZM2393
    Measurement frequency: ≤ 1.2 MHz, Supported component size: 0603 to 2220
  • ZM2394
    Measurement frequency: ≤ 2 MHz, Supported component size: 0201 (0.3 mm thick) to 14 mm (square)
  • ZM2394H
    Measurement frequency: ≤ 30 MHz, Supported component size: 0201 (0.3 mm thick) to 14 mm (square)

Test Fixture - Four-terminal Alligator-clip Test Leads

Preamplifier

Low Noise Amplifier

  • SA-200F3
    Low Noise Amplifier, DC to 800kHz, Input impedance: 1k / 10k / 100kΩ ±5%(DC)
  • SA-220F5
    Low Noise FET Amplifier, 1kHz to 80MHz, Input impedance: 1MΩ ±5%(5kHz)
  • SA-230F5
    Low Noise Amplifier, 1kHz to 100MHz, Input impedance: 50Ω ±5%(100kHz
  • SA-240F5
    Low Noise FET Amplifier, DC to 20MHz, Input impedance 1 MΩ / 100 MΩ / open // 60 pF typ.
  • SA-410F3
    Low Noise Differential FET Amplifier, DC to 1MHz, Input impedance: 1kΩ/ 10kΩ/ 100kΩ
  • SA-420F5
    Low Noise Differential FET Amplifier, 1kHz to 70MHz, Input impedance: 1MΩ ±5%(1kHz)
  • SA-421F5
    Low Noise Differential FET Amplifier, 30kHz to 30MHz, Input impedance: 1MΩ ±5%(1kHz)
  • SA-430F5
    Low Noise Differential Amplifier, 1kHz to 100MHz, Input impedance: 50Ω ±5%(100kHz)
  • SA-440F5
    Low Noise Differential FET Amplifier, DC to 20MHz, Input impedance 1 MΩ / 100 MΩ / open // 60 pF typ.

Current Amplifier (current to voltage converter) - Wideband Current Amplifier

  • SA-604F2
    Gain: 10 M (V/A), DC to 500 kHz, Noise: 45 fA/√Hz (typ.), Shielded case
  • SA-605F2
    Gain: 100 M (V/A), DC to 250 kHz, Noise: 15 fA/√Hz (typ.), Shielded case
  • SA-606F2
    Gain: 1 G (V/A), DC to 100 kHz, Noise: 6 fA/√Hz (typ.), Shielded case
  • SA-607F2
    Gain: 10 G (V/A), DC to 20 kHz, Noise: 2.5 fA/√Hz (typ.), Shielded case

DC Power Supply - Low Noise DC Power Supply

  • LP5393
    ±12 V to ±15 V, 0.1 A max. Output noise: 10 μVrms or lower (typ.),
    Output voltage stability: ±20 ppm/°C (typ.)
  • LP5394
    0 to ±15 V, 0.1 A max. Output noise: 10 μVrms or lower (typ.),
    Output voltage stability: ±10 ppm/°C (typ.), 10-turn potentiometer

DC Power Supply - BNC Adapter

DC Power Supply - Binding Post Adapter

  • PA-001-2591
    Converts output to binding post for LP5393/LP5394

DC Power Supply - Output Cable A

  • PA-001-2372
    Output cable for SA-600 series (cable length: 2 m)

AC Power Source

AC Power Source - Programmable AC/DC Power Source

  • EC1000SA
    1 kVA / 1 kW, Max. output voltage: 310 V, Max peak current: 4 times*
    *At the rated output voltage. Multifunction (Measurement, sequence, current limiter and protection etc.)

Function Modules

Wideband Current Amplifier

  • CA-554F2
    Gain: 10 M (V/A), DC to 500 kHz, Noise: 45 fA/√Hz (typ.), PCB implementation, Dual-in-line package
  • CA-555F2
    Gain: 100 M (V/A), DC to 250 kHz, Noise: 15 fA/√Hz (typ.), PCB implementation, Dual-in-line package
  • CA-556F2
    Gain: 1 G (V/A), DC to 100 kHz, Noise: 6 fA/√Hz (typ.), PCB implementation, Dual-in-line package
  • CA-557F2
    Gain: 10 G (V/A), DC to 20 kHz, Noise: 2.5 fA/√Hz (typ.), PCB implementation, Dual-in-line package
  • CA-653F2
    Gain: 1 M (V/A), DC to 1 MHz, Noise: 150 fA/√Hz (typ.), PCB implementation, Single-in-line package
  • CA-654F2
    Gain: 10 M (V/A), DC to 500 kHz, Noise: 45 fA/√Hz (typ.), PCB implementation,
    Single-in-line package
  • CA-655F2
    Gain: 100 M (V/A), DC to 250 kHz, Noise: 15 fA/√Hz (typ.), PCB implementation, Single-in-line package
  • CA-656F2
    Gain: 1 G (V/A), DC to 100 kHz, Noise: 6 fA/√Hz (typ.), PCB implementation, Single-in-line package
  • CA-657F2
    Gain: 10 G (V/A), DC to 20 kHz, Noise: 2.5 fA/√Hz (typ.), PCB implementation, Single-in-line package

Trans Impedance Amplifier

  • IV-202F4
    Gain: 1 x 105 V/A, DC to 10 MHz, DC coupling unbalanced, single-ended, 6-surface-shielded package
  • V-204F3
    Gain: 4 x 106 V/A, DC to 1 MHz, DC coupling unbalanced, single-ended, 6-surface-shielded package

Trans Condactance Amplifier

  • VI-206F1
    Transconductance: 100 μA/V, Load resistance range: 0 Ω to 100 kΩ, Frequency response: DC to 7 kHz, Max. output current: ±100 A
  • VI-207F1
    Transconductance: 1mA/V, Load resistance range: 0 Ω to 10 kΩ, Frequency response: DC to 10 kHz, Max. output current: ±1 mA
  • VI-309F1
    Transconductance: 5 mA/V(High gain input) 50 μA/V(Low gain input), Load resistance range: 0 Ω to 10 Ω, Frequency response: DC to 10 kHz, Max. output current: ±50 mA

Piezo Driver

  • PD-206-150P
    Gain: 40dB±0.2dB, Frequency response: DC to 200kHz, Equivalent input noise voltage: 0.8n/√Hz (typ.)
  • PD-206-150B
    Gain: 40dB±0.2dB, Frequency response: DC to 200kHz, Equivalent input noise voltage: 1.5n/√Hz (typ.)

Phase Detector

  • CD-552R2
    Frequency range: 100Hz to 20kHz, Gain (φ=0): 1 to 10Vdc/Vo-p, Reference signal: C-MOS(0/+5V)
  • CD-951V3
    Phase sifter for CD-552R3 and CD-552R4 Frequency range : 100Hz to 200kHz, Input level : C-MOS (0/+5V)
  • VD-291F2
    Input impedance: 5kΩ, Input signal: CMOS(0/5V)level, Square wave, Detection frequency range: 100Hz to 20kHz, Gain: x1, x10 and external Setting
  • VD-291F3
    Input impedance: 5kΩ, Input signal: CMOS(0/5V)level, Square wave, Detection frequency range: 1kHz to 200kHz, Gain: x1, x10 and external Setting
  • VD-291F4
    Input impedance: 1.25kΩ, Input signal: CMOS(0/5V)level, Square wave, Detection frequency range: 10kHz to 2MHz, Gain: x1, x10 and external Setting

Resistor Tunable Filter

  • SR-1BP1
    1-pole pair BPF, 6 dB/oct BW, f0: 40 Hz to 1.6 kHz, 20-pin single-in-line package
  • SR-1BP2
    1-pole pair BPF, 6 dB/oct BW, f0: 400 Hz to 10 kHz, 20-pin single-in-line package
  • SR-2BE1
    2-pole pair BEF, f0: 40 Hz to 1.6 kHz, 20-pin single-in-line package
  • SR-2BE2
    2-pole pair BEF, f0: 400 Hz to 10 kHz, 20-pin single-in-line package
  • SR-2BLH1
    2-pole Butterworth LPF/HPF, 12 dB/oct, f0: 40 Hz to 1.6 kHz, 20-pin single-in-line package
  • SR-2BLH2
    2-pole Butterworth LPF/HPF, 12 dB/oct, f0: 400 Hz to 20 kHz, 20-pin single-in-line package
  • SR-2BLH3
    2-pole Butterworth LPF/HPF, 12 dB/oct, f0: 5 kHz to 100 kHz, 20-pin single-in-line package
  • SR-2BP1
    2-pole pair BPF, 12 dB/oct BW, f0: 40 Hz to 1.6 kHz, 20-pin single-in-line package
  • SR-2BP2
    2-pole pair BPF, 12 dB/oct BW, f0: 400 Hz to 10 kHz, 20-pin single-in-line package
  • SR-4BH1
    4-pole Butterworth HPF, 24 dB/oct, fc: 40 Hz to 1.6 kHz, 20-pin single-in-line package
  • SR-4BH2
    4-pole Butterworth HPF, 24 dB/oct, fc: 400 Hz to 5 kHz, 20-pin single-in-line package
  • SR-4BL1
    4-pole Butterworth LPF, 24 dB/oct, fc: 40 Hz to 1.6 kHz, 20-pin single-in-line package
  • SR-4BL2
    4-pole Butterworth LPF, 24 dB/oct, fc: 400 Hz to 20 kHz, 20-pin single-in-line package
  • SR-4BL3
    4-pole Butterworth LPF, 24 dB/oct, fc: 5 kHz to 100 kHz, 20-pin single-in-line package
  • SR-4FH1
    4-pole Elliptic HPF, 42 dB/oct equivalent, fc: 40 Hz to 1.6 kHz, 20-pin single-in-line package
  • SR-4FH2
    4-pole Elliptic HPF, 42 dB/oct equivalent, fc: 400 Hz to 5 kHz, 20-pin single-in-line package
  • SR-4FL1
    4-pole Elliptic LPF, 42 dB/oct equivalent, fc: 40 Hz to 1.6 kHz, 20-pin single-in-line package
  • SR-4FL2
    4-pole Elliptic LPF, 42 dB/oct equivalent, fc: 400 Hz to 20 kHz, 20-pin single-in-line package
  • SR-4FL3
    4-pole Elliptic LPF, 42 dB/oct equivalent, fc: 5 kHz to 100 kHz, 20-pin single-in-line package

BCD Resistor

(RD-404D is a logic control resistor designed for SR series resistor tunable filters)
  • RD-404D1
    Logic frequency setting for SR series, Frequency setting range: 10 Hz to 1.6 kHz, 20-pin single-in-line package
  • RD-404D2
    Logic frequency setting for SR series, Frequency setting range: 100 Hz to 16 kHz, 20-pin single-in-line package